What Are Quilters Blogging About Today?

I have been traveling and teaching. I picked up my friend and fellow Studio 180 Design Certified Instructor Barb Wiseman, we left Pennsylvania and went west to Lexington, KY and met up with another fellow Studio 180 Design Certified Instructor Toni Raynolds. Barb and Toni assisted me while teaching One Block Wonder and a Hollow Cube 60 classes at Thomas Sewing Center. What a fabulous time we had! Thank you Toni for taking such good care of Barb & I.

Thank you to Thomas Sewing Center owner Alysson Rife and everyone who attended. I had a great time.

After Thomas Sewing ...

Does anyone remember an old song from the 40’s called “I got the Sun in the Morning “? It was written by Irving Berlin in 1946 for a musical called “Annie Get Your Gun”.

I’ve been humming that tune while working on this great panel designed by the Morris Group for QT Fabrics. The panel measures 36″ x 43″. Bohemian Sunrise will be available in early 2025.

I was at a quilt retreat last weekend with my friends the Turtle Crew. I took off the borders which left me with a width of 28″ for the panel. I cut ...

Check out my unboxing video of new QT Fabrics coming out early 2025.

@QTFabric #Bohemian Sunrise #Autumn Smiles #TuckerTrimmer1 #Star60

If you follow me you know I love my Chihuahua Tucker.

But, These cat panels by Rubin Design Studio, exclusively from eQuilter are just fabulous!

Mysterious Kitty panel measures 43.5″ x 29.5″. I decided to cut my strips 3.25″ yielding 168 – 5″ finished hexies.

I decided to start my design at the top of the panel, choosing the upper right corner to start, and placing 8 hexies across the top before going down to start the left side.

Above is the design I settled on. The edges of the panel range from black to dark blue. I ...

I get asked all the time where am I teaching. Below is my schedule so far:

• 9/17:  North Country Trunk Show, NY
• 10/5: Zoom OBW Trunk Show, Arizona State Guild
• 11/9: Zoom OBW 1, Arizona State Guild
• 11/11-13: Thomas Sewing Center,  Lexington KY, OBW Workshop
• 11/14: 11/17: Fantastic Quilters OBW Trunk Show & Workshop, Fairfield Glade TN
• 12/7: Zoom OBW 2 , Arizona State Guild
• 2025
• 1/10:  Zoom OBW Trunk Show, Quilt Inc., Delmar, NY
• 1/18: 60 degree Log Cabin, Thread Bears Quilt Guild, Oneida NY
• 1/20: Sew Busy, Gloversville, NY, OBW ...

A BIG Thank You to Amy of Amy’s Quilt Room in Uniontown, PA. I’m just now home from teaching a One Block Wonder (OBW) workshop or as Amy would call “Quiltpalooza”! It was fabulous! I had so much fun. The Hilton Garden Inn at Uniontown PA was the perfect venue. We had a great space and were very well cared by the staff.

This group of ladies did such a great job. They learned all about OBW’s and how to make Hollow Cube 60’s & Star 60 units. We delve into how to design and enhance our ...

Just for fun I thought I would share how the Quilt Ninja came about.

It all started in 2008. I went to the Virginia Consortium of Quilters Celabration at Smith Mountian Lake and participated in an Apron contest and won 1st place.

I covered the apron vest in pockets. I placed a pocket on my back to hold a ruler and placed a rotary cutter in a front pocket.

I would whip out the ruler and rotary cutter at the same time, stating loudly “Quilt Ninja”! It was pretty funny. Needless to say, the Quilt Ninja became my alter ego ...

I wanted to share two OBW workshops/retreats coming up. The first one is in Reliance TN at Quilters Getaway, 898 Childers Creek Road Reliance, TN 37369 – November 11 – 13, 2024. Hosted by Toni Raynolds of Pieced Perfection. Join me for a creative journey in the world of 60 degree kaleidoscopes.

• Identifying and cutting your repeats.
• Aligning repeats including difficult fabrics.
• Choosing a ruler and understanding the difference between pointed & blunt tip rulers.
• Deciding what strip widths to cut
• And of course, cutting all your equilateral triangles.
• Designing with the hexagons,
• Integrating stars & cubes
• Designing around a panel

Make your ...

I’ve been playing among the stars, literally! In August I will be going to Amy’s Quilt Room in Union Town, PA to teach a One Block Wonder (OBW) Workshop. I want to show them how to design aound a panel and how to add hexies/stars of different sizes.

The panel is Salt Water Dreaming by Spirit of the Bush, it measures 41.5″ x 27″. I decided to cut my strips 3.25″ to yield 5″ finished hexies. When you want to add hexies/stars/cubes of different sizes, they must be divisible by the original size ...

I’m playing around with a panel by Spirit of the Bush, Saltwater Dreaming. I want to see how many intricate hexagons I can make. They seem like they would represent tidal pools to me. The large hexagon on the bottom of the panel is 15″ finished. Can you tell what Deb Tucker techniques I used to make it?

@studio180design @debtucker #star60

While I was teaching a OBW workshop at the Strong House Inn in April, I figured out how to put a hexie inside of a hollow cube. I couldn’t wait to get home and start playing.

I had 6 yards of this fabric from the Astral Voyage line by Josephine Wall and 3 Wishes Fabrics. It only had an 8″ repeat, but the design elements were large. I cut my strips 3 3/4″ for 6″ finished hexies. I make my hollow cubes using Deb Tucker’s Hollow Cube 60 Technique Sheet and the Star 60 Tool. I can ...

When I started cutting the hexies from Queen Bee strips, I knew it was going to be a beautiful OBW! The Queen Bee panel is by by QT Fabrics. It measures 36″ x 44″. The Queen Bee line will be in stores June 2024.

I cut my strips for the hexies 3.25″ for 5″ finished hexies. I cut off the borders. The inner border containing flowers measured 3.25″ so I was able to use them for more hexies. I had a total of 106 hexies to design with.

I used QT Fabrics blender line Rapture to create Hollow ...

I fell in love with this panel the first time I saw it. The colors are just fabulous. Resplendent is by QT Fabrics. The panel measured 36″ x 44″. Resplendent will be in stores June 2024.

I removed the borders and saved them to use as a outer border and binding for the finished quilt. I cut my strips 3.25″ for 5″ finished hexies. I had a total of 105 hexies to design with.

I created Star 60 stars and surrounded the peacock with half hexies using QT Fabrics blender line Rapture. The colors Ocean and Amethyst blended beautifully ...

I’m having so much fun with this panel from Rubin Design Studio Intricate Illustrated Kitty – Multi – 28″ x 44″ PANEL – DIGITAL.

Stay tuned for colorful updates.

@Equilter #Equilter #Star60 @studio180design

I was at a quilt retreat this weekend with my quilting buddies. I brought plenty of projects to work on, but a local quilt shop had a sale going on so I bought some beautiful fabric.

Shadow Play by Maywood fabrics had a nice light, medium, dark and a great green for a backgound, everyting I needed for Hollow Cube 60’s. I had an idea and wanted to see if it would work.

I love my Star 60 tool by Deb Tucker and I love Hollow Cubes using the Hollow Cube 60 Technique Sheet. I wanted to see if ...

I have partnered with QT Fabrics and I wanted to share with you two panels they sent me that are coming to your local Quilt Shops Summer 2024! I will be making One Block Wonders with them. I will be [posting my progress here.

@QTFabrics #QTFabrics @Studio180design #studio180design

December is so busy, I haven’t had a chance to do much sewing. Last Summer I decided to take Deb Tucker’s pattern Snow Crystal and put it in the middle of a One Block Wonder (OBW). Snow Crystal is made with the Star 60 Tool.

The fabric is Flower Festival by Benartex. The flowers are about 7″ across. I bought it back in 2022. The background is a dark plum color.

When I started to assemble the quilt when I discovered a problem. I had 3″ too much in the length of the hexie rows that were being ...

I don’t know about you, but in our house Christmas decorating begins after dinner on Thanksgiving! My house is full of Santa’s & Christmas trees.

I love Santa’s. I had this panel for over a year, but got a chance to work on it before Thanksgiving.

This panel is called “Merry Christmas to All” by Marshall Dry Goods. The inside of the panel measured 29.5″ x 37″. I cut 3.25″ strip for 5″ finished hexies.

The odd width of 29.5″ left me with a 1″ wide red strip I would have to hide later.

I ...

I didn’t get to go Quilt Market but my quilt did! Thank you QT Fabrics. The Creepin it real fabric line will be in shops March 2024. Ask your favorite quilt shop to order your panels now!

This quilt is made entirely from 7 panels by QT Fabrics except for the teal border and the 8 black stars. The stars were made using Studio180 Design’s Star 60 tool.

A great One Block Wonder begins with great fabric! Be sure to ask your favorite quilt shop to carry this collection, “Creepin It Real” ships in March 2024.

This fabulous panel “Creepin It Real” was provided to me by QT Fabrics. The panel measures 37″ x 43″. I did not include the frames in my finished quilt. The inside of the panel measured 32″ x 39″.

“Creepin It Real” has such vibrant colors. I cut 3.75″ strips which yielded 6″ finished hexies.

This collage shows some of my design process ending with the hexies stitched into rows. I added ...